Presonus CDL12 Hybrid Point Source/Line Array Constant Directivity Loudspeaker - Product Information
The Presonus CDL12 brings the power and ability to fill a space with sound of a line array sound system to small portable enclosure. This is achieved through a ground breaking design featuring eight 2-inch drivers aligned in a segmented circular-arc centered in front of a 12-inch woofer. The sound pattern always radiates from the center of the CDL12. The result is Constant Directivity or clear natural music reproduction and articulate speech intelligibility from anywhere in the room or on the field. The listener is never off access from the sound system.
Inside the speaker, is an integrated Class D PDA-1000 amplifier that features onboard DSP presets to facilitate and simplify arrayed configurations. These processing features are unlocked when the CDL12 is connected to a standard LAN network and remotely controlled using Worx Control software (PC or MAC). Worx Control provides speaker-management tools that include compression, limiting, and 800 ms of delay. An 8-band EQ with individually selectable filters (High Pass, Low Pass, High Shelf, Low Shelf, Notch, All Pass, Band Pass) is also provided to compensate for room anomalies. Speakers can be grouped and managed individually or together. Performance monitoring indicators allow you to monitor temperature and signal levels remotely.
The locking Ethernet connection on the CDL12's integrated PDA-1000 power amplifier also provides audio networking capability via Dante. Dante's multi-channel digital media networking technology delivers near-zero latency and synchronization and has been adopted by many pro-audio manufacturers, facilitating the CDL12 loudspeaker's interoperability with a wide range of equipment.
Acoustic Performance
- Configuration - Active 2-way
- Frequency Response (-3 dB) - 48 Hz – 18 kHz
- Frequency Response (-10 dB) - 42 Hz – 19 kHz
- Maximum Peak SPL - 131 dB
- Crossover Frequency - 420 Hz
Amplifier
- Type - Class D
- Total Power Output - 2000W Peak, 1000W Program (500W RMS)
- LF Power - 1000W Peak, 500W Program (250W RMS)
- HF Power - 1000W Peak, 500W Program (250W RMS)
- Rated THD - <0.05% (20 Hz - 20 kHz)
- Dynamic Range - 119 dB (A-weighted)
- Bandwidth - 20 Hz - 20 kHz
Connections and Controls
- Input Channels - 1 Line
- Input Connector Types - 1 XLR
- Line Input Impedance - 40 kΩ
- Maximum Input - +4 dBu
- Output Connector - Direct Line Out (XLR)
- Networking - Dante (Audio and Control), Control (only) via Locking Ethernet
- Controls - Preset Select HPF On/Off
- Indicators - Over Temperature, Signal, -3 dB, Limiter, Clip, Network Status
DSP
- Effects - Compression, Limiting, Delay, 8-band EQ and preset selection via WorxControl
- HPF - 90 Hz, 4th-order Butterworth
- Bit Depth - 24-bit
- Sample Rate - 48 kHz
Suspension Mounting
- Rigging Points - Integrated Rigging (10:1 load)
- Mounting - Dual-position pole mount (0° and 10°) 35 mm
Videos and Sound Clips
-
PreSonus—Introducing the CDL Hybrid Point Source / Line Array LoudspeakersLearn more about the CDL Loudspeakers here: https://www.presonus.com/products/CDL-Loudspeakers Based on designs and research on a Constant-Directivity Two-Way Loudspeaker System presented at the 143rd AES Convention by Hugh Sarvis and Don Keele,...
-
Rick Naqvi and Hugh Sarvis discuss the New CDL LoudspeakersLearn more about the CDL Loudspeakers here: https://www.presonus.com/products/CDL-Loudspeakers PreSonus® Audio Electronics is pleased to introduce the CDL-series loudspeakers, the latest additions to the company’s line of innovative sound...