Black Swamp Woodblock Multiclamp Mount Kit
Black Swamp Woodblock Multiclamp Mount Kit
Black Swamp Woodblock Multiclamp Mount Kit
Roll over image to zoom in Click on image to zoom
Black Swamp Woodblock Multiclamp Mount KitBlack Swamp Woodblock Multiclamp Mount KitBlack Swamp Woodblock Multiclamp Mount Kit

Black Swamp Woodblock Multiclamp Mount Kit

Black Swamp Percussion MODEL: MWBM
3 reviews
Price:
$42.00
Stock:
In stock

Description

The Black Swamp Woodblock Multiclamp Mount Kit attaches to the back of most brand woodblocks using supplied screws, grommets and clamp. The clamp fits a standard 3/8" knurled post for convenient placement in multi-percussion set ups, marching band or drum corps auxiliary set ups, or claustrophobic theater pit set ups.

  • Woodblock NOT included

Product Info

SKU BLA-MWBM
UPC 874717004633
Weight 1.0 lb

You may also like

Recently viewed

Customer Reviews

Black Swamp Woodblock Mount

Rating
Posted by
David Bryson
Date Posted
07/30/2024

Not sure if the design has been tweaked since the previous review was posted, but I haven't had the issues described in the previous review. I've mounted it onto a Black Swamp MWB2 medium woodblock and the woodblock sits normally on a flat surface. The mounting hole is now squared off at the back (so it's more like a teardrop shape), so I haven't had issues with it sitting perpendicularly to the rod when mounted. Happy with the purchase.

Could Be Better

Rating
Posted by
Carl
Date Posted
07/25/2021

The Woodblock Multiclamp Mount Kit from Black Swamp is.. alright. I've had mine for about 2 years and it served the purpose it needed to, but there are a couple things I'd like to address. If you still want to place your woodblock on a trap table/play it unmounted, be sure you remove the eyebolt, washer, and wingnut; otherwise the block will tip backwards (unless it's attached to a large woodblock). Now for the criticism: the eyebolt and the mounting hole are too circular to the point where the block will tilt a little bit down to the right when tightened. Compare this to LP mounts, where the eyebolt is octagonal and the mounting hole is shaped like a diamond, and this design choice leaves very little opportunity for the bell/block to tilt when tightened. Even if that's not the case, where these designs don't actually affect the way the block is tightened, the mounts just don't line up perpendicularly to the rod they are mounted on w/o the blocks. If you have this problem and want to try re-drilling the holes in your block(s), you need to know what you're doing when you fill the holes; I used standard wood filler you can get at a hardware store and any slight bumps along the surface when the filler hardens makes it impossible to drill straight. You could sand over the re-filled holes but at the expense of most likely ruining the woodblock's finish. I'd also suggest adding more drilling templates on the printed instructions in the event that the consumer wants to re-drill the holes.

Works great

Rating
Posted by
Jonathan Lucke
Date Posted
05/29/2020

This is a great mount from Black Swamp Percussion and works flawlessly with my woodblock. It is also the only mount from Black Swamp that isn't severely overpriced.